() 해외배송 가능
 상품명 |
크렐(Krell) S 550i 인티앰프 |
|---|---|
|
판매가 |
6,500,000원 |
|
QR코드 |
   |
|
배송방법 |
택배 |
|
배송비 |
무료 |
|
수량 |
  |
Features
Building on the success of the award winning S-300i integrated amplifier, the
S-550i boasts the sound quality and power output capable of driving any
loudspeaker to its maximum performance. Delivering 275 watts of stereo output,
the S-550i is a power source for virtually any speaker on the market while
occupying a fraction of the space typically required for a system delivering
this sound quality. The S-550i is outfitted with balanced and single-ended
inputs, iPod dock, and Theater Throughput™ mode. Developed by Krell, Theater
Throughput™ simplifies integration into home theater systems. For custom
integration applications, 12 volt triggers, RS-232 connectivity and rack mount
ears are included. Operational parameters can be customized via the menu system
that is accessible from the front panel or the included brushed Aluminum remote
control.
Preamplifier Highlights
The preamplifier section features circuit concepts from Krell's flagship
Phantom preamplifier. Krell Current Mode provides unequaled bandwidth for the
most revealing playback of today's high resolution music sources. Direct coupled
circuitry eliminates impact-robbing capacitors from the signal path and an
elegant, custom-machined level control adjusts volume. Discrete circuitry, in a
balanced topology, is afforded its own power supply regulation. All signal gain
is realized using surface mount technology featuring proprietary current mirrors
with nearly 500 times the open loop linearity of other designs. Negative
feedback is not used anywhere in the preamplifier, nor is it necessary.
Open-loop distortion is typically less than 0.003%. The volume control is
realized with a balanced resistor ladder - bandwidth and transient response of
the preamp circuitry are virtually unaffected by the volume setting.
Power Amplifier Highlights
The S-550i packs a massive 1,750 watt transformer and 68,000μF of capacitance
into an elegant 5" high chassis. This power supply feeds classic Krell circuitry
throughout the topology using only discrete circuitry. As with all Krell
amplifiers, the S-550i design is an ideal voltage source. That is, the S-550i
doubles its power output when a speaker's impedance is halved. For the S-550i,
the results are 275 watts into 8 Ohms and 550 watts into 4 ohms. This capability
is essential for realistic reproduction of a recording's dynamic content. Most
amplifiers can't deliver this power doubling, leaving music sounding compressed
and lifeless.
제품 Specifications
Inputs
1 pr. balanced via XLR connectors
3 pr. single-ended via RCA connectors
1 dedicated iPod input via 30-pin connector
Outputs
1 pr. preamp outputs via RCA connectors
1 pr. speaker outputs via gold-plated binding posts
Control inputs
1 RS-232 input via 9-pin D-subminiature connector
1 remote IR detector input via 3-conductor 3.5 mm connector
1 12 VDC trigger input via 2-conductor 3.5 mm connector
Control output
1 programmable 12 VDC trigger output (30
mA maximum current) via 2-conductor 3.5 mm connector
Input impedance
Balanced: 95 kΩ
Single-ended: 47.5 kΩ
Frequency response
20 Hz to 20 kHz +0, -0.08 dB
<2 Hz to 140 kHz +0, -3 dB
Signal-to-noise ratio
>89 dB, wideband, unweighted, at
maximum gain, referred to full power output
>96 dB, "A"-weighted
Gain
32.0 dB
Input sensitivity
Single-ended or balanced: 1.18 V RMS
Total harmonic distortion
<0.025% at 1 kHz, at 275 W, 8 Ω load
<0.20% at 20 kHz, at 275 W, 8 Ω load
Output power
275 W RMS per channel at 8 Ω
550 W RMS per channel at 4 Ω
Output voltage
133 V peak to peak
47 V RMS
Output current
20 A peak
Slew rate
80 V/μs
Output impedance
<0.073 Ω at 20 Hz
<0.08 Ω, 20 Hz to 20 kHz
Damping factor
>110 at 20 Hz, referred to 8 Ω
>75, 20 Hz to 20 kHz, referred to 8 Ω
Power consumption
Standby: 1 W
High-current standby: 40 W
Idle: 90 W
Maximum: 1800 W
Heat output
Standby: 3.4 BTU/hr
High-current standby: 140 BTU/hr
Idle: 310 BTU/hr
Maximum: 2400 BTU/hr
Specifications for preamp only:
Gain
6.3 dB (single-ended)
Volume control
Current-mode, 12-bit, discrete R-2R
ladder
Input overload
Balanced: 12 V RMS
Single-ended: 6 V RMS
Output overload
8 V RMS (single-ended)
Frequency response
20 Hz to 20 kHz +0, -0.05 dB
<2 Hz to 1.0 MHz +0, -3 dB
Total harmonic distortion
<0.009%, 20 Hz to 20 kHz, at 2 V RMS
Signal-to-noise ratio
>87 dB, wideband, unweighted, at
maximum gain, referred to 2 V RMS
>94 dB, "A"-weighted
Dimensions
17.26 in W x 5.84 in H x 17.70 in D
438 mm W x 148 mm H x 450 mm D
Weight
Unit only: 64 lb [29.0 kg]
As shipped: 76 lb [34.4 kg]
게시물이 없습니다
게시물이 없습니다
