컨텐츠 바로가기

0

상품분류메뉴

  • 하이파이
  • 홈시어터
  • 미니 하이파이
  • PC파이
  • 스피커
  • 케이블/액세서리

메인왼쪽-입금정보

알뜰살뜰 쿠폰존


현재 위치

  1. 하이파이

이전 제품 보기

다음 제품 보기

크렐(Krell) PHANTOM II 프리앰프 적립금

() 해외배송 가능

기본 정보
icon 상품명 크렐(Krell) PHANTOM II 프리앰프
icon 판매가 15,600,000원
icon QR코드
qrcode
이미지로 저장코드URL 복사트위터로 보내기
icon 배송방법 택배
icon 배송비 무료
icon 수량 수량증가수량감소
상품 옵션

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.  

바로 구매하기 장바구니 담기 관심상품 등록 상품문의 하기


Features

The Phantom II incorporates the advanced technologies and brilliant design of
the Phantom preamplifier into a single chassis format. Often overlooked, the
preamplifier is a critical component in the signal chain. A small signal must be
carefully amplified without damaging the ephemeral staging and dimensional
components of the music. Heard through the Phantom II, music fills a listening
room with three dimensional imaging, tonal integrity, and staggering dynamics.


The Phantom II is the perfect companion for the Evolution 302e power
amplifier and Cipher SACD/CD player.


Circuitry Highlights

Sharing the same audio circuitry as its bigger brother, the Phantom II
preamplifier is a dual monaural circuit design with the left and right channels
afforded their own power supply regulation and individual full chassis sized
boards. All signal gain is realized in surface mount topology using proprietary
multiple-output current mirrors with nearly 500 times the open loop linearity of
other designs 1.5 MHz open loop bandwidth in a zero feedback, balanced, Krell
Current Mode design terminating in Krell CAST. A complete Krell system (source,
preamp, and amplifier) system, connected using CAST interconnects reduces the
number of voltage gain stages to the minimum, one. The resulting noise floor
approaches the theoretical limit of technology. Negative feedback is not used
anywhere in he preamp, nor is it necessary. Open-loop distortion is typically
less than 0.003%. The volume control is realized with a balanced resistor ladder
- bandwidth and transient response of the preamp circuitry are virtually
unaffected by the volume setting.


Power Supply Highlights

The Phantom II audio circuits receive power from a Krell Current Mode analog
power supply. The power supply avoids the common integrated circuit topology
used in many preamplifiers and instead mimics the design topology of Krell
Evolution e Series amplifiers. The circuitry is completely discrete giving it
the ability to respond quickly to current demands and also be unaffected by AC
voltage power fluctuations. Oversized for a preamplifier, the power supply
features a 140 VA transformer and 35,000μF of capacitance.

The Phantom II preamplifier is offered in diamond-cut silver or a luxurious
black finish.

 

제품 Specfications

 

Inputs
2 pr. CAST via 4-pin bayonet connectors
2 pr. balanced via XLR connectors
3 pr. single-ended via RCA connectors


Tape input
1 pr. single-ended via RCA connector


Main outputs
2 pr. CAST via 4-pin bayonet connectors
1 pr. balanced via XLR connector
1 pr. single-ended via RCA connector


Tape outputs
1 pr. single-ended via RCA connector, buffered


Control inputs
1 RS-232 input via a 9-pin D-subminiature connector
1 remote IR detector input via a 3-conductor
3.5 mm connector
1 12 VDC trigger input via 3.5 mm connector
1 preamplifier link via an RJ-45 connector


Control outputs
2 individually programmable 12 VDC
trigger outputs via 3.5 mm connectors
1 preamplifier link via an RJ-45 connector


Power output
1 phono power output (+/-20 VDC) for KPE
via a 9-pin
D-subminiature connector


Input impedance
CAST: 45 Ohms
Balanced: 95 k Ohms
Single-ended: 47.5 k Ohms


Output impedance
CAST: >1 M Ohms
Balanced: 50 Ohms
Single-ended: 25 Ohms


Gain
12 dB (CAST or balanced output)
6 dB (single-ended output)


Volume control
Balanced, current-mode,16-bit,
discrete R-2R ladder


Input overload
CAST: 14 mA RMS
Balanced: 14 V RMS
Single-ended: 7 V RMS


Output overload
CAST: 16 mA RMS
Balanced: 16 V RMS
Single-ended: 8 V RMS


Frequency response
20 Hz to 20 kHz +/- 0.02 dB
0.1 Hz to 1.5 MHz +0, -3 dB


Total harmonic distortion plus noise
Balanced Output:
<0.004%, 20 Hz to 20 kHz, 4 V RMS or 4
mA RMS
Signal-to-noise ratio
4 V RMS balanced or 4 mA RMS
CAST output
Wideband, unweighted: >100 dB
"A" weighted: >109 dB


Power consumption
Standby: 45 W
Power on: 70 W
Power on, with KPE: 80 W


Dimensions
17.3 in.W x 3.8 in. H x 18.3 in. D
43.8 cm W x 9.7 cm H x 46.4 cm D


Weight
Shipped: 32 lbs., 14.5 kg

게시물이 없습니다

상품후기쓰기 모두 보기

게시물이 없습니다

상품문의하기 모두 보기

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 무료
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
    고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
  경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
  다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
  포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
  (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
  따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
  제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
  (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
  (색상 교환, 사이즈 교환 등 포함)
companyagreementprivacyguide